ProJoint Fusion Neutral Jointing Compound

Description

The quick and easy solution to filling joints between paving slabs and setts, suitable for natural stone and concrete paving. So simple to use, ProJoint Fusion allows an untrained hand to consistently deliver perfect joints every time – whatever the weather!

It delivers a weed free, frost resistant joint, without staining the paving – saving you time and money. ProJoint Fusion is supplied in two 7.5kg vacuum-packed pouches within the 15kg tub.

ProJoint Fusion is available in four colours: neutral (buff), mid grey, basalt and black.

• Contractor-sized 15kg tubs – product supplied in two 7.5kg bags for easy handling and to minimise waste
• Suitable for use in wet weather
• Professional strength and suitable for joint widths of 3mm upwards
• Cement free and non-hazardous
• Suitable for pedestrian traffic: ideal for paths and patios
• Pre-mixed, ready to use and ideal for DIY use
• Suitable for natural stone and concrete paving, setts and slabs

This product can be used in light rain but prolonged and heavy rain will delay the curing process and increase the risk of fluid damage.

Fusion cures on exposure to air. Cure times are dependent on temperature and humidity, but as a guide the product can accept foot traffic 12 hours from installation. Please note that cold temperatures and wet weather can delay the curing time significantly.

ProJoint Fusion is not designed for porcelain paving. If you are planning on using porcelain paving, please refer to our ProJoint Porcelain Primer and Grout.

ProJoint Fusion may highlight and enhance the natural surface colours and textures of the paving. This can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect therefore general weathering and foot traffic will accelerate its disappearance.

Approximate coverage per 15kg tub: