Description

The ultimate solution to filling joints between paving slabs and setts, suitable for standard natural stone and concrete paving on pedestrian and vehicular areas with heavy loads up to 40 tonnes.

The two-part epoxy resin system is easily mixed and quickly applied as a slurry to dampened paving. The ultra high strength of ProJoint V400-WT means that it can be used in the most demanding of environments where heavy traffic loading is required.

ProJoint V400-WT is available in three colours: neutral (buff), mid grey and black.

• Two-part resin based mortar system, cement free
• Permeable bedding mix is not required
• Heavy traffic loads up to 40 tonnes, ideal for high traffic areas and roadways
• Self compacting, fast and easy application – without bending or kneeling
• Professional strength suitable for joint widths of 5mm upwards
• Weed, pressure washer and frost resistant
• Suitable for natural stone and concrete paving, setts and slabs

ProJoint V400-WT is not designed for porcelain paving. If you are planning on using porcelain paving, please refer to our ProJoint Porcelain Primer and Grout.

Due to the high epoxy resin content ProJoint V400-WT will highlight and enhance the natural surface colours and textures of the paving. This sheen can be especially noticeable on grey paving, including granite, so a test area is advised before use. It is important to spread the mix across the total paving area to ensure the potential effect is uniform. Please note that this is a temporary effect; weathering and foot traffic will accelerate its disappearance. For extra porous paving, or to minimise any effect use ProJoint Fusion or ProJoint V35-UV.

Approximate coverage per 27kg kit:

Joint Size 600x600mm slabs Four size Indian (600mm series)  100x100mm setts
5 x 25mm 45m2 39m2 8m2
10 x 25mm 22.5m2 19.5m2 4m2
15 x 25mm 15m2 13m2 2.67m2

Additional information

Colour

Brand

Projoint